How To Cut Grooves In Wood By Hand. If you decide to make a groove in a piece of wood, a plunge router is the easiest tool to use for making straight and curved grooves. Using a rotary tool also works for cutting short grooves.
Carpenter Hands At Work Making Grooves On Wood Cutting Board Surface from www.dreamstime.com
But it is quite difficult to make long, straight lines with this. Check the groove measurements, making sure that it is neither too long nor too short. Check twice if the router bit placid on the line properly.
Using A Rotary Tool Also Works For Cutting Short Grooves.
Check twice if the router bit placid on the line properly. Almost 90% of the work is done to cut grooves in the wood. Now wear your safety glasses and turn the router.
Pull The Router To Create The Groove.
No matter what you use for cutting groove by which tool, be ensure to wear safety. Secure a scrap wood piece on top of the wood being cut. Check the groove measurements, making sure that it is neither too long nor too short.
Hold A Straight Edge On The Wooden Piece That You Are Cutting, Allowing It To Serve As A Guide In Drawing A Straight Line On The Groove.
Then simply press downward and move forward to make grooves in the wood. But it is quite difficult to make long, straight lines with this. And start with the edge of your straight line.
If You Decide To Make A Groove In A Piece Of Wood, A Plunge Router Is The Easiest Tool To Use For Making Straight And Curved Grooves.
