How To Sublimation On Wood

wood referensi web image

How To Sublimation On Wood. This method will leave you with no residue and vibrant results every time. Apply a thin layer of polycrylic to the surface.

How To Sublimate Wood Products In A Standard Flat Heat Press YouTube
How To Sublimate Wood Products In A Standard Flat Heat Press YouTube from www.youtube.com

It leaves a clear protective finish on wood and is easy to apply. This method will leave you with no residue and vibrant results every time. Place the wood under the heat press sandwiched between two sheets of.

At Last, Set The Heat Press At 350˚ To 400˚ Temperature, And The Time Is 60 To 90 Seconds (It Depends On Which Wood Type You Are Using);


Prepare the wood for sublimation by sanding it. You can use the same protective paper as you did for the laminating portion. (recommended temperature 370 degrees for 90 seconds) place the printed sublimation paper on top of the lamination wood facing down.

Trim The Transfer Paper To Fit The Size Of The Wood You Want To Print On.


In summary, to sublimate on wood, do the following: In today's video, i show you how to sublimate on wood using polycrylic! This method will leave you with no residue and vibrant results every time.

Place The Wood Under The Heat Press Sandwiched Between Two Sheets Of.


It leaves a clear protective finish on wood and is easy to apply. Apply a thin layer of polycrylic to the surface. Another popular diy wood sublimation method is to coat your wood with a layer of polycrylic.

Put The Entire Thing Inside Of Protective Paper And Press At 375 For 90 Seconds.


Cut the lamination paper to the size of the wood substrate and place it on top, apply heat and pressure by using a heat press. Make sure to keep the sublimation paper upside when you start pressing. Add each of the letters to a sublimation print and tape down well.